Home / Event / PL+S 2019: Adam Hall to showcase new event technology offering

PL+S 2019: Adam Hall to showcase new event technology offering

The Adam Hall Group is presenting a number of new products from its event technology portfolio at this year’s Prolight + Sound (April 2 to 5) in Frankfurt.

Firstly, LD Systems will showcase the U500 IEM Series – in-ear monitoring systems for bands, musicians and rental companies. Available as a set with and without headphones, the U500 IEM Series offers switchable transmit power of 2mW, 10mW and 30mW, an OLED display, a 3-band EQ with parametric mids, user name input, storage space for ten presets and allows – depending on the frequency band – the operation of up to twelve systems in parallel.

Also at the show will be the company’s MAUI i1, featuring nine 3-inch full-range woofers and two 1-inch neodymium high-frequency drivers, including a 2-way crossover, delivering 120 watts (RMS) to 8 ohms. Thanks to the BEM-optimised high-frequency waveguide, the vertical radiation behaviour can be precisely controlled to ensure even sound distribution in acoustically problematic environments.

Meanwhile, LD Systems is extending its growing installation portfolio with new power and mixer amplifiers special for fixed installations. The IPA Series includes DSP-based 4-channel power amplifiers – IPA412 (120W) and IPA424 (240W) – with integrated transmitters per channel, 100V / 70V taps, and a low-Z (4Ohm) output.

The IPA models can be equipped with an expansion card to control all parameters via Ethernet and integrate the amplifiers into larger installation networks via Dante with AoIP connectivity. In addition, the IPA series can communicate with remote devices and paging microphones through a Controller Area Network (CAN) bus.

LD Systems will also present the first member of the new IMA series. With a wide range of input and output options, including Bluetooth for wireless music source connection and multi-level priority switching, the mixer amplifier can be flexibly integrated in a compact 9.5-inch enclosure for commercial and industrial applications. The IMA30 offers four priority levels for emergency calls, microphone / line inputs and connected music sources, as well as an optional standby mode.

The installation loudspeakers of the new DQOR series are equally suitable for indoor and outdoor projects. The 2-way systems are available in 3″, 5.25″ and 8″ sizes and are available in low and high impedance 8 and 16 ohm versions, respectively. The DQOR models can also be integrated in a 70/100 V environment via a variable power selector switch. For flexible use in a variety of indoor and outdoor applications, the housings have an integrated wall-mounting bracket and a slide / lock mechanism.

Check out all this and more on the Adam Hall stand (Hall 8, F28 / F30) at Prolight + Sound 2019.

Check Also

InfoComm 2019: NEXO debuts first 12” point source cabinet

NEXO unveiled its new P12 loudspeaker at Infocomm in Orlando, FL this week. The P12 …